How do I lift something with a Forklift?

Verify the nameplate on the forklift to make sure you do not exceed the determined weight capacity. Open the forklift prongs as wide as the equipment will allow in order to evenly distribute the forklifts’ weight. Check that the correct lift fixture required is being used, such as a drum grabber or a carpet spike. Drive the forklift to position to lift the load. Insert the forks through the pallet far enough to make sure you can secure the load completely on the forklift while ensuring the load is centered and not leaning to one side. Shift the forks backward to tilt the weight so that it leans back against the forklift. Use tie-down straps to secure any loose or uneven ends on the load. Lift and tilt the load back one more time and then drive with the forks approximately ten inches above the ground to avoid tipping.

Click to Download the pdf

Forklifts Modesto: Questions

Tips on Maintaining your Forklift

Keep the battery fully charged on an electric forklift model and if it runs on liquid propane gas, ensure the tank stays full to maintain efficiency. Ensure all greased fittings are regularly maintained, this includes all of the moving joints of the forklift. Check the motor oil, transmission and hydraulic fluid often. How regularly you check depends on how often... More

How do I calculate the capacity of a Forklift?

Consult the data plate attached to the forklift to determine the standard load capacity available. Each model of forklift will be rated to a certain capacity; the average sit-down model can safely transport 4000lbs. The data plat is the resource for all calculations regarding lift capacities and should never be tampered with or removed or replaced. This information plate is... More

How do I determine the Load Center of a Forklift?

Each forklift has a load capacity rating that determines the amount of weight the forklift can safely transport. The load capacity often changes due to the shape, size and position of the load on the forks, though these measurements can be simply made in the field with specific calculations. Safe operation of a forklift requires the operator to be aware... More

What prevents a Forklift from tipping over?

Forklift construction is a designed cantilevered balance where the load that is carried by the forks is supported by the forklifts front wheels acting as a fulcrum. The weight of the forklift machine itself acts as a counterbalance to keep the device from tipping over. More

Lift Parts Express

With fast delivery times and an industry leading warranty, there is no better time to purchase all of your parts than today. Call us for a detailed quote at:

TOLL FREE: 1-888-695-7994
Modesto, California

Email Us
About Us